A Top company - serving Hempstead, NY

Copperfield Crown Repair Nationwide

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Copperfield Crown Repair: The Hempstead Owner’s Guide

A Copperfield crown repair in Hempstead typically runs $425 to $900 installed, depending on whether we’re sealing and resurfacing the existing crown or pouring a new one. Most Hempstead homeowners discover the crown has failed the same way: a water stain on the ceiling near the fireplace, or crumbling mortar on the chimney cap after a Nor’easter. We carry Copperfield-compatible repair materials on the truck and can usually get the job done in one visit.

Call (516) 963-1068

The crown is the concrete slab that sits on top of your chimney, sealing the gap between the flue liner and the brick. When it cracks, water gets in. In Hempstead, that means freeze-thaw cycles work the cracks wider every winter. Wendell Pike and our crew have been fixing Copperfield crowns across Nassau County since 1999, and we’ve seen what a bad one looks like. We’ve also seen plenty that just need sealing, not replacement. If it doesn’t need doing, we’ll tell you.

Top Hat Chimney is an independent service provider. We’re not affiliated with Copperfield, but we work with their products and stock compatible repair materials on the truck.

Which Copperfield Models This Applies To

Most Copperfield prefabricated and masonry-adjacent chimney systems use a poured concrete crown with standard dimensions that match the outside width of the chase or masonry stack. That means the crown repair for a Copperfield installed in a Hempstead home follows the flue size, not a complicated model number. We match the crown to the outside dimension of the chimney and the inside dimension of the flue tile.

What you need to know before you call us: check for the metal plate on the firebox or the chase top. Copperfield stamps the model number there, and it changes the crown spec. A Copperfield with a 6-inch flue gets a crown designed for a 6-inch termination; an 8-inch flue needs a larger overhang. That overhang matters. The crown has to extend at least 2 inches past the brick face so water drips clear of the masonry. Short overhangs are one of the most common crown failures we see around Hofstra University homes, and it’s the first thing we check.

The OEM-vs-aftermarket decision is pretty straightforward for Copperfield. Copperfield’s original crowns are solid concrete, but the aftermarket mixes we use in Hempstead hold up better because we add a flexible acrylic bonding agent that handles Long Island’s freeze-thaw cycles. For most Hempstead homeowners, that’s the better buy. We’ll show you both options and tell you straight which one we’d choose.

Signs Your Copperfield Crown Repair Is Failing

  • Cracks wider than a nickel across the crown surface. This is water’s entry point. In Hempstead, every freeze pushes those cracks apart a little more. By spring, the crack that was cosmetic in October is a channel into your chimney chase.
  • Spalling or flaking concrete on the crown. This means water has saturated the crown and is blowing the surface off in sheets. Once spalling starts, the crown is usually past a simple sealant repair.
  • Water stains on the ceiling near the fireplace. Water that gets through a failed crown runs down the chase and exits wherever it finds the path of least resistance. By the time you see a ceiling stain, the crown has been leaking for a while.
  • Rust on the damper or firebox hardware. That rust is a sign moisture is traveling down the flue from above. The crown is the likely source, especially in older Hempstead chimneys that haven’t been inspected in years.
  • Crumbling mortar or brick at the top courses. A crown that doesn’t extend past the brick lets water run straight down the masonry face. The top three or four courses of brick in Hempstead chimneys catch that water first and start to deteriorate.

You can spot most of these from the ground with a pair of binoculars. If you see any of them, call us at (516) 963-1068. We’ll put a camera up there and show you exactly what’s happening before we sell you anything.

Replacement Cost & What’s Included

Here’s what Copperfield crown repair costs in Hempstead, based on what We see on local homes.

  • Full crown replacement (tear-off, forms, new pour, flexible sealant): $600 to $900
  • Crown resurfacing (patch, fill, resurface with acrylic bonding agent): $425 to $600
  • Small crack repair and sealing: $175 to $300
  • Crown plus new Copperfield-compatible flue cap: add $150 to $400

The range depends on chimney height, access, crown size, and how much of the old crown has to be removed. Steeper Hempstead roofs and taller chases take longer, which pushes the cost up. Every quote includes the material, labor, clean-up, and camera inspection before and after. You get the number upfront, before a single tool comes off the truck, and it’s the number on the invoice. The whole crown repair is covered by our 90-Day Done Right Promise. If it’s not right, we make it right at no extra cost. And right now, it’s $40 off any repair over $200.

DIY or Call Us?

Here’s the honest answer. You can safely inspect a Copperfield crown from the ground with binoculars. Look for cracks, spalling, or missing concrete. You can also safely seal a hairline crack with a masonry sealant if you can reach it from a sturdy extension ladder and the chimney is a single story. That’s a $30 fix, and if the crack is less than one-eighth of an inch, it might buy you a year or three.

What you shouldn’t do is climb onto a Hempstead roof with a bucket of mixed concrete and try to pour a new crown yourself. Chimney crowns need to slope away from the flue, overhang the brick by 2 inches minimum, and be formed around the flue termination with the right bond flexibility. Get the mix wrong or the form wrong and you’ll be doing it again in two winters. You’ll also be up on a ladder for an hour working with heavy material, and that’s where a lot of homeowners learn their travel health insurance doesn’t cover what their general health insurance won’t. Call us at (516) 963-1068 and we’ll come out, take a look, and if it’s a sealant job we’ll tell you that and charge you for exactly that.

FAQs

Get a Straight Answer From Someone Who’s Been Up There

If your Copperfield crown is cracked, spalling, or letting water into your Hempstead home, the fastest way to a straight answer is a phone call. We answer live around the clock, and you’ll get a real person, often Wendell himself. Call (516) 963-1068 for a free estimate. If you’re not ready committed to a repair, that’s fine. We’ll inspect it, show you the camera footage, and tell you plainly whether it can wait. Ask anyone on your street.

Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Hempstead and nearby areas.

Need Chimney Cleaning help in Hempstead? Licensed & insured · Camera-inspected response · free estimates
Call (516) 963-1068
Local Service Coverage

Request a Free Estimate in Hempstead

Tell us what you need - Top Hat Chimney responds fast. No obligation.

By clicking submit, you agree to the terms of our Privacy Policy and agree to be contacted through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch