Olympia Chimney Chimney Liner & Rebuild Nationwide

Olympia Chimney Chimney Liner & Rebuild in Hempstead: What to Know First

Olympia Chimney liner replacement and rebuild work in Hempstead typically runs $1,400-$3,200 depending on whether you need a new stainless liner, a partial rebuild, or full flue reconstruction. We’re an independent Olympia Chimney service provider, which means we work on the product line without being beholden to the manufacturer’s book. Most Hempstead jobs take one full day from setup to cleanup.

Call (516) 963-1068

This page is for Hempstead homeowners running an Olympia Chimney liner who want the honest word on what’s failing, what it costs to fix, and whether the work even needs doing this year. Call (516) 963-1068 and Wendell or someone on the crew will answer. Wendell Pike has been in and around Hempstead chimneys for decades, including plenty of inspections near Hofstra University where older construction and older flues tend to sit side by side.

Key Takeaways

• Olympia Chimney liners are solid products, but their 316L flex liners can kink at offset angles in older Hempstead chimneys where the flue takes a jog.
• Most Olympia liner problems in Hempstead show up as visible rust staining on the exterior masonry or inexplicable draft loss, not as dramatic blowouts.
• We quote one price before work starts and it’s the price on the invoice. No add-ons at the door.
• Every Olympia job gets a camera inspection with video you can see yourself before we recommend anything.
• If it doesn’t need doing, Wendell will tell you. That sometimes means delayed work and lost revenue, and he’s fine with it.

How Olympia Chimney Products Fail - and How We Fix Them

• 316L flex liner kinking at the smoke shelf. Olympia’s flexible stainless liners are tough, but Hempstead homes built before 1970 often have offset flue paths that force the liner to make sharp turns. The kink chokes draft and traps creosote. We see this in the colonial and split-level stock around Hempstead Turnpike all the time. The fix is usually a rigid-to-flex hybrid or an insulation wrap that locks the liner in place.
• Riveted seams on Olympia rigid liners pulling apart under thermal cycling. Olympia rigid sections use a snap-lock seam. Nassau County winters put the liner through repeated expansion and contraction, and after enough cycles the seam can separate, spilling flue gas into the chase. We catch it on camera, then either re-seam with high-temp sealant or swap the section.
• Condensation corrosion at the base of Olympia liners paired with gas appliances. Olympia’s liners are rated for gas flue gas, but when an older Hempstead furnace dumps low-temperature exhaust into a liner sized for a wood fire, condensation sits at the bottom and eats through from the inside. Camera inspection shows it as pinhole rust at the lowest three feet. We replace the section and often recommend a smaller-diameter liner for the actual appliance load.
• Worn refractory panels in Olympia fireplace models exposing the liner collar. Some Olympia prefab fireplaces use refractory panels that crack over years of use. Once the panel goes, the liner connection is exposed to direct heat and degrades fast. We stock replacement panels for the common Olympia models still in circulation around Hempstead.
• Improper previous installation. More Olympia liner failures we see in Hempstead trace back to whoever put the first one in, not the product itself. Missing insulation wrap, wrong termination cap, unsealed top plate. We re-run the liner correctly and document the whole job so there’s no guessing later.

Our Olympia Chimney Chimney Liner & Rebuild Process

1. 1
   You call (516) 963-1068. A live person answers. We book a time and give you a real arrival window.
2. 2
   We arrive and inspect. Wendell or one of his crew goes up on the roof with a camera. You watch the footage on the ground or we send it to your phone. No mystery verdicts.
3. 3
   We hand you a flat quote. Whether it’s a stainless liner swap, a partial rebuild, or a full flue reconstruction, the number we give you is the number you pay. $40 off any repair over $200 applies.
4. 4
   We decide on parts together. Olympia OEM parts when they’re available and make sense. Quality aftermarket when they’re faster and just as good. We tell you which is which and why.
5. 5
   We do the work. Liner goes in, rebuild goes up, everything gets sealed and tested. Your yard is cleaner than when we arrived.
6. 6
   You get the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back at no cost.

What Olympia Chimney Chimney Liner & Rebuild Costs in Hempstead

What moves the price is access, height, and liner diameter. A two-story Hempstead colonial with a steep pitch costs more than a rancher near Hofstra. Liner age matters too; older Olympia liners sometimes need the full swap rather than a patch. We give you the camera footage so you can see exactly why. Estimates are free. Seniors and veterans always get 10% off.

Why Hempstead Homeowners Call Top Hat Chimney for Olympia Chimney Work

We’ve been doing this since 1999, and Wendell’s name is on the work. Not a franchise that rolled into Nassau County last spring. We also install and service DuraFlex, HeatShield, and Gelco, which means we’re not married to one brand. If an Olympia part is backordered and a HeatShield equivalent does the job better, we tell you. The 90-Day Done Right Promise is in writing on every job. Calls are answered by a live person around the clock, and it’s often Wendell himself at two in the morning. No trip charge inside our service county. Free second opinion on any competing written estimate. The sweeps who show up at your Hempstead door are background-checked, uniformed, and they call if the arrival time slips.

FAQs